link: Mananging Consultant

Cari Blog Ini

Memuat...

Rabu, 04 November 2015

Raspberry Pi Powered Lego Car


Dwika Sudrajat
Write a comment...
Raspberry Pi Model B Schematics
These should provide the information you need to build add-on boards which attach to the GPIO expansion connector.
Note: developers of expansion boards should not rely on the connection of expansion connector pins 9, 14, 20 and 25 to GND, pin 4 to 5V or pin 17 to 3V3 and should instead treat these pins as DNC (do not connect).
http://www.rs-online.com/…/…/raspberry-pi-model-b-schematics
Like   Comment   
Comments
Dwika Sudrajat Raspberry Pi Model B Schematics Revision 2. There has been a small change to the GPIO pin out of revision 2.0, to add ARM JTAG support and to present a different I2C peripheral from that which is (heavily) used on the camera interface. Users wishing to...See More
Dwika Sudrajat
Write a comment...
Integrate with a Raspberry Pi camera so that you can visually see what triggered the event.
Make it so that you can setup a schedule for when the alarm is active.
Enable output devices to take some type of action when motion is detected, like fire a Nerf gun or activate an alarm siren.
I use the alarm based Raspberry Pi projects that I design in conjunction with video surveillance systems.
http://videos.cctvcamerapros.com/…/send-push-notifications-…
Like   Comment   
Comments
Dwika Sudrajat
Write a comment...
– Raspberry Pi
– 1.8v LED
– Infrared LED
The circuit for controlling infrared Lego power functions is not that complicated.
We basically just need to attach an infrared LED and a standard LED to the Raspberry Pi GPIO pin 22. ...
See More
Like   Comment   
Comments
Dwika Sudrajat
Write a comment...
Raspberry Pi B+ does have a row of 40 pins,
they are NOT an IDE connector by any means.
You can read up on what they if you do some Google research, but you do not want to try and just connect up anything IDE related.
It won't work, and may damage your Pi.
Like   Comment   
Comments
Dwika Sudrajat
Write a comment...
Gertboard is an interface extender board that connects to the Raspberry Pi via the GPIO pins using a ribbon cable.
The image below is what the Gerboard (left) hooked up to RasPi (right)
http://www.codeproject.com/…/Raspberry-Pi-Episode-In-Out-th…
Like   Comment   
Comments
Dwika Sudrajat
Write a comment...
Raspberry Pi home surveillance system
detecting motion in video frames.
http://www.pyimagesearch.com/…/installing-opencv-3-0-for-b…/
Like   Comment   
Comments
Dwika Sudrajat
Write a comment...
Raspberry Pi.
Remote Controlling a Car over the Web. Ingredients: Smartphone, WebSocket.
http://blog.kaazing.com/…/remote-controlling-a-car-over-th…/
Like   Comment   
Comments
Dwika Sudrajat Raspberry Pi accessible and more importantly, visible. It’s sitting on the truck’s plateau, lightly taped to it, so it doesn’t fall off as the truck accelerates and comes to sudden stops (read: bumps into things).
Dwika Sudrajat
Write a comment...
RasPiCamCorder 2
– standalone raspberry pi camcorder with buttons, screen
and DropBox capability
http://raspi.tv/…/raspicamcorder-2-standalone-raspberry-pi-…
Like   Comment   

Tidak ada komentar: